Kar 45 L

Kar 45 L=5.000 mm

Vertical electro-hydraulic lift for alignment purposes, with a capacity of 4.500 kg (10.000 lbs)
LT capacity 4.000 kg (8.800 Ibs)
The lift is already according updating of August 2010 of the European norm EN 1493


N – standard platform (not equipped)
CA – version with front recess on platform for turn plates and/or play detectors
CT – version for total convergence with front recess on platform and rear plates
LT – version with auxiliary free-wheeling lift table

All lifts are available above ground and flush mount, one way and drive through version

Main Features:
Lift Capacity: 4.500 kg
Platform length: 5. 000 mm standard
Collapsed Height = 210 mm ( N version ) –260 mm ( CT/LT version)
Available in the flush mount and above ground version
LT Capacity: 4.000 kg
LT Platforms length: from 1.900 to 2.100 mm (capacity reduced to 3.500 Kg)

Mechanical Safety Locks in each cylinder
Burst valve in each cylinder
High pressure Relief valve in all cylinders and in control unit
Photocell for control of platforms parallelism
Limit switch with acoustic warning for the complete lowering
Low voltage controls
Dead man controls

Automatic blocking system of the rear slip plates
Automatic platforms realignment

Xem thông tin của máy tại đây :