V648 iTouch

The best at your touch.
V648 iTouch offers everything All-inclusive. Touch-Screen for easily working, 3D Touchless input, three lasers for the application of each type of weight with maximum precision, 3D.Scanner for automatic control of the geometry of the tire and rim, G3.Extreme electronics for maximum working speed.

Technologically unsurpassed and still easy to use.
Based on the Videotronic technology, the balancer is controlled by a Personal Computer, with Windows CE operating system. User can easily control all functions through an LCD monitor: with the use of graphics and icons, using the wheel balancer is absolutely intuitive. No confusing “frills”, no strange “gadgets”. Instead, a well-tested user-friendly interface with buttons and icons for a professional use. Fast, clear, effective.
Also, the software, stored on a Flash memory, can be upgraded in seconds. You can always take advantage of our continuous technical developments and make sure your product is never outdated!

Design and ergonomy to offer the best
A base with 15 weights compartments, one compartment for tools (pliers, etc.). Weight tray also offers place for 3 standard cones and 6 centering bushings. Flanges can be placed laterally on the wheel balancer: six flange holders are provided.
Extra space for weights (6 trays) is provided on the back-mount weights-holder, which also offers an extra space for 3 adapters.
Its innovative body with shaped weight tray frees the most area near to the wheel, and the new easy-alu basement improves access to inside of the rim to ease  application of the adhesive weights.
The wheel guard has a new design that reduces opening and closing efforts and reduce dramatically space requirements.

TOUCH screen

allows an easy and intuitive use by the user with a greater ergonomics

G3.Extreme Electronic motor control
The new technology G3.EXTREME introduces the following news:
. electronic motor control (inverter)
. use of quiet and powerful three-phase motors
. very quick cycle time (start, braking and automatic wheel positioning in 5.5. sec)
. automatic positioning system APS2 faster and more accurate, controlled by the keyboard or the brake pedal
. electromagnetic brake included as standard (not for V58x)
. 50-60Hz seamless operation (electronic motor control operates shaft always at same speed)

Precision mechanics
The heart of the balancer is built around the VQI 3-sensor system, a FASEP exclusive design, and with IFS system (integrated-flange shaft) for maximum centering accuracy.
It also comes with the new shaft 2003, allowing larger tires and rims and designed to work easily on wheels where adhesive weights are required, with a larger access to the inside of the rim, more then any other competitor.

Built to last (as strong as it looks!)
Every detail is designed and tested to grant long time of good working quality.
The Heavy Duty shaft allows 90kg of maximum weight on the shaft, a record unsurpassed. No competitor’s product can match it.
Bigger and tougher than any other competitor’s product !

Full Automatic 3D Input System
The machine is equipped with Automatic Distance/Diameter Input (option A) and Automatic Width Input (option D).
With Automatic Distance/Diameter, also ALU-SE function (automatic input of wheel data and adhesive weight application system) is available to improve productivity when balancing wheel with stick-on weights.
Balance wheels perfectly with stick-on weights at first spin using ALU-SE!

mode (for automatic balancing mode selection) available on selected model configurations.
Special options to maximize your productivity.

The PneuLock system allow a complete cycle much faster compared to manual wheel locking, and at the same time it allows a more precise wheel centering.

The Laser System delivers an accurate and fast job also in the case of balancing with stick-on weights.
No more approximate ALU1.2.3.4 programs: 0-0 to the first spin assured with stick-on weights too!

3D Scanner

The 3D.SCANNER control system allows to measure the run-out of tire and rim with 1mm accuracy, as well as Side Slip of tire.
It completely integrates with Videotronic.Ce software and it allows to visualize the following data:
. point-by-point measure
. maximum deviation
. first harmonic
. point of maximum deviation
. side-slip for 4 wheels

3D Touchleess input. The 3D Touchless Input systems automatically measures the wheel data (distance + diameter + width) both for alloy and for steel rims, allowing balancing with both stick-on and clip-on weights, respectively

Touchless Laser
The LASER automatically measures wheel data (distance + diameter) for both steel and alloy wheels.
It also indicates (laser pointer) the exact position of application of the weight in ALU-SE modes.

Touchless Sonar
The SONAR automatically measures wheel data (outside distance) for steel wheels from 12″ to 26″

Customized Special Version
Do you have special request to fit your garage design or to impress your customer ?
If you need a customized special version we can do it!

Ready for Zinc, Steel and Tin balancing materials.

Owners ManualSell SheetUpgrade Packages